A while back, I posted an initial review of the Grizzly T10010 Wet Grinder; you can read the review here. Well, after having used the machine for a while, I thought I would post a follow up and give some more thoughts. First, I still love this machine for sharpening and honing; it is SUPER fast and easy. Second, you will need some "3rd party" accessories. I've read that the best, most economical setup for this machine, as compared to a Tormek, is to buy this machine, but use the Tormek accessories since they will fit. I have to say that I TOTALLY agree! Out of the box, I was fighting the Grizzly straight edge jig that comes with the tool; it's just not very good. So, the first thing I bought was the Tormek Square Edge Jig from Highland Hardware. That was a huge impovement, but I still wasn't getting a completely square edge and had the feeling that my wheel was not completely trued up. So, my next purchase, from Highland Hardware, was Tormek Truing and Dressing Kit. This was perfect! I found that my wheel was about a 32nd of an inch off from end to end, but also was not perfectly round. So, after a couple of passes with the truing tool, and I had a nice level, perfectly round, surface. I then went to town on my hand plane blades and got them nice and flat for a change; so much better.
So, bottom line is, if you don't want to fork out the money for the Tormek system, can recommend the Grizzly T10010 Wet Grinder, but I would save some money to also buy the Tormek accessories; it makes a big difference!